Author Topic: Dip Switch  (Read 279 times)

Offline

  • Hero Member
  • ****
  • Posts: 702
  • Edwardstone, Suffolk.
Re: Dip Switch
« on: 08 February 2013, 08:42:04 pm »
^^^^that looks like the one CBS sell.....

Slight side track here but I'll get back to the point:

I used to drive a self propelled crop sprayer which had a floor mounted switch for knocking off/on the main boom flow control. ( so you could knock off the boom sections on the joystick one by one  and so not get spazzy finger overload knock of the main switch by foot)

So, it gets used everytime you get to the headland turn and if you multiply the amount of times you turn by the amount of times you spray  4000acres  during a season muliplied by 3/4years  you get to a '**** of alot' and the switch never failed .

The sprayer was (then) a Gem of Lincoln, latterly CaseIH and I believe the switch was a Durite one.

May not be rivet counting  'genuine'  but if they can stick that and the mud n' water then maybe worth a look
Oh I've changed!
1982 GT 300(tdi) 88'' - 'NIAB'
1982 V8 109 'No Name' ( as yet, and in pieces)