« previous next »
Pages: [1]

Author Topic: Are we on the level?  (Read 343 times)

Offline

  • Full Member
  • **
  • Posts: 71
Are we on the level?
« on: 12 May 2013, 08:10:51 pm »
Newish para's on the rear with standard leafs up front she the old girl leans to the near side a fair bit. Before I start off replacing bits, are the leafs on an S3 handed at all like some coilers?
Ta as ever :thumbs:
Logged
1975 Series bakkie with 200tdi

Offline

  • Hero Member
  • ****
  • Posts: 516
  • Location: Sheffield
Re: Are we on the level?
« Reply #1 on: 12 May 2013, 08:14:15 pm »
Yes the drivers side are curved more
Logged
I am nothing without Tea

Offline

  • M.E.
  • Hero Member
  • *
  • Posts: 11863
  • Blithering idiot.
  • Location: Watching you...
Re: Are we on the level?
« Reply #2 on: 12 May 2013, 08:15:18 pm »
Only the fronts though.
Logged
Leo Sprayer, More iron oxide than Church North.  - I've looked up the airshaft, - have you? Follow my Blog

Offline

  • Full Member
  • **
  • Posts: 71
Re: Are we on the level?
« Reply #3 on: 14 May 2013, 07:18:35 pm »
I'll have to check if they have not been fitted wrong handed by the po :(
Logged
1975 Series bakkie with 200tdi

Offline

  • Hero Member
  • ****
  • Posts: 1127
  • Location: Wiltshire
Re: Are we on the level?
« Reply #4 on: 14 May 2013, 08:45:26 pm »
Should sit level with a full tank and driver
Logged
You can do anything you want to do,
Just as long as you dont want to do it with me!.

Offline

  • Full Member
  • **
  • Posts: 65
  • Location: Eppalock Victoria Australia
Re: Are we on the level?
« Reply #5 on: 15 May 2013, 02:04:31 am »
Hi Flatcap
I have a series 3 109 and recently replaced the rear springs the new ones were marked left and right, which strangely enoungh was how I fitted them (I have been know to disregard things like this)
Cheers
Alan
Logged
Alan Wilkin
Eppalock Victoria Australia
Land Rovers are like beer One is never enough

Offline

  • Full Member
  • **
  • Posts: 49
Re: Are we on the level?
« Reply #6 on: 15 May 2013, 06:55:58 pm »
Are the parabolics britpart ones? Mine looks like it's about to fall over...

GB springs paras on the floor waiting to be fitted
Logged
Pages: [1]
« previous next »