Author Topic: Fuel gauge/voltage stabiliser  (Read 1289 times)

Offline feelinperky

  • Sr. Member
  • ***
  • Posts: 442
  • Location: Kirkoswald, penrith
Re: Fuel gauge/voltage stabiliser
« on: 07 July 2012, 07:55:08 am »
Well my fuel gauge also reads off because i changed the float assembly. Also the earth for the sender earths through the tank to the chassis and i had hammered the tank on a rock and so was nt earthing to the chassis even though its connected. Worth putting a proper earth from the sender to the chassis. Also you can put resistors across the back of the gauge to get the right reading. Oh and mine does not have a voltage stabiliser as its too early.  ;D
" if i claim to be wiseman then surely i dont know"

2a fire tender...win.